Accuwright Mechanical
TOOLroom
The Accuwright lab

Shapes catalog

Reducer lateralAny branch on any reducer: rolled, offset, leaning either way, with a cut end. Flat patterns for the laser.
ConeConcentric, eccentric or offset, down to a point. Radii or a triangulation table, and the flat pattern in 1 to 8 pieces.
Cylinder miterPipe or rolled cylinder with each end cut at any angle, the cuts rolled any way. Cutbacks, wrap template or flat pattern.
Gored elbowAny bend angle, radius and number of pieces. Gore cutbacks, wrap templates or flat patterns, and the pipe to cut them from.
Square to roundSquare or rectangle to round, centered or offset, in 1, 2 or 4 pieces. Triangulation lengths for every corner, and the flat pattern.
Rectangle to rectangle and hopperHoppers and flat-sided transitions, centered or offset. Hip lengths and brake bend angles at every corner.
Screw conveyor flightFlight blank from OD, ID and pitch: ring radii and the notch to cut out.